oreoarchitect.blogg.se

1. #Samsung dvr cannot access menu to set clock hdm how to#
2. #Samsung dvr cannot access menu to set clock hdm install#
3. #Samsung dvr cannot access menu to set clock hdm manual#
4. #Samsung dvr cannot access menu to set clock hdm Pc#

For this let us install a DVR viewing software in our PC. Now you can test whether your DVR is accessible from the LAN (internal network). Your DVR is already configured and connected to LAN.

#Samsung dvr cannot access menu to set clock hdm Pc#

Now you can connect it to the LAN (DVR and PC connected to same modem/router) as shown previously.ģ.Test connection in LAN using DVR software. You have configured your DVR’s IP address and port. You can modify it if you need, but stick on to the range specified by your device.Ģ.Connect DVR to LAN containing modem / router. Our device has default value for Device port and http port with TCP protocol, We are using the same. So we will be setting protocol type as TCP.

TCP port is recommended for internet connection. HTTP Port : 80 (Default for SRD 1653D – TCP protocol).Device Port : 4520-4524 (Default for SRD 1653D – TCP protocol).The software will request the DVR using DVR’s IP and Port number to provide the Video to them. We will be using this IP address and port number while setting Software on PC or smartphone. Set your DNS address as IP address of Modem / Router (in our case 192.168.1.1).Īfter setting IP address you need to set the port number to which the DVR will be listening to.Subnet mask for the network (If there is no subnetting, it will be 255.255.255.0).Set the gateway address as IP address of Modem / Router (in our case 192.168.1.1).Set the IP Address for DVR (In our case 192.168.1.200).Select the required bandwidth 2Mbps, unlimited etc.Main Menu -> Network -> Connection Mode -> Interface

#Samsung dvr cannot access menu to set clock hdm manual#

Kindly check the device manual for more specific information on this. Steps to set IP address for DVR will be different for devices based on their brands and models. The first 3 octet of all devices will be 192.168.1. That is, if the router has an IP address 192.168.1.1, then all the devices in same network will have an IP with format 192.168.1.xxx. The first three octet of IP address of Router, PC and DVR should be same. Now we need to configure the LAN properly with suitable IP address. Consider a simple scenario where one PC and DVR is connected to the Router / Modem via Ethernet cable as shown in the pic. We are going to connect our DVR to the LAN network.

#Samsung dvr cannot access menu to set clock hdm how to#

We won’t be explaining how to set up DVR and camera connection.īasic knowledge of Setting IP Address for PC and Router/Modem. We assume that you already have your DVR connected to the camera and are able to view it through any of the devices like TV or VGA Monitor. We will be explaining how to connect DVR to Modem / Router. How to Connect Samsung DVR ‘SRD-1653D’ to Router ‘Huawei B525s-95a’ for Remote Viewing With slight modification you can make it work for your DVR and Modem. We will be using DVR (Samsung SRD-1653D) and Modem/Router (Huawei B525s-95a) to explain the scenario. Kindly read the guide and understand the steps required for the same. You can connect your CCTV to your personal devices like Laptop, Tablet or Smartphones for viewing it remotely as live from your home or any other place where you are. In order to make maximum use of CCTV Camera or DVR you need to set it up for remote viewing. It is even used for Employee Monitoring in business firms. People use it for protecting their asset, community etc. Its users varies from individuals to big Business firms. In today’s digital life, CCTV surveillance is a very common term for everyone.